Abstract
Al- and La-modified adsorbent materials (PO–Al, PO–La) were prepared by impregnating Polygonum orientale Linn. straw with Al2(SO4)3 and La(NO3)3·6H2O solutions. The potential of removing fluoride using these modified adsorbents was examined. In the PO, PO–Al and PO–La adsorption systems, the fluoride adsorption process followed pseudo-second-order kinetics, and the kinetic constants for k2 and R2 were 0.0276 and 0.9609; 0.2070 and 0.9994; 0.1266 and 0.9933, respectively. The adsorption equilibrium results showed the best match with Langmuir isotherms. Moreover, the maximum monolayer adsorption capacity of PO, PO–Al and PO–La are 0.0923, 3.3190 and 1.2514 mg/g, respectively, in 30 °C. The regeneration results show that the effectively regenerating ability of modified adsorbents. Al-modified adsorbent showed the best results in terms of cost-effectiveness and adsorption efficiency for fluoride adsorption.
Highlights
As stated by the report of the World Health Organization, the intake of fluoride in drinking water at low concentrations (0.5–1 mg/L) is beneficial, especially in promoting enamel calcification and protecting teeth against teeth decay [1,2,3,4]
These modified adsorbents were prepared by impregnating P. orientale with Al2 (SO4 )3 and La(NO3 )3 ·6H2 O
It was suggested that fluoride adsorption onto the biochar activated carbon did not conform to the pseudo-first-order model
Summary
As stated by the report of the World Health Organization, the intake of fluoride in drinking water at low concentrations (0.5–1 mg/L) is beneficial, especially in promoting enamel calcification and protecting teeth against teeth decay [1,2,3,4]. Various techniques have been developed to remove excess fluoride from drinking water, such as adsorption, coagulation, ion exchange, microbial-induced precipitation [10,11], electrocoagulation [12], electrostatic unit [13] and electrodialysis [5,14]. Among these techniques, adsorption is effective, economical, convenient, and environmentally friendly [3,4,15,16]
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have