Abstract

A discrete low noise In0.6Ga0.4As MHEMT with 150 nm gate length was flip-chip assembled on the low-cost RO3210 organic substrate for wireless communication applications. The measured DC characteristics were very similar before and after flip-chip assembly. The flip-chip packaged MHEMT showed a high drain current density of 516 mA/mm and a maximum transconductance of 576 mS/mm at a VDS of 0.8 V. The insertion gain of the flip-chip packaged device was decayed less than 2 dB up to 100 GHz as compared to the data of bare die. Moreover, the measured minimum noise figure was less than 2 dB as measured at VDS of 0.7 V and VGS of -0.7 V in the frequency range from 20 to 64 GHz for the device after flip-chip assembly. The excellent performance of the flip-chip packaged MHEMT demonstrates the feasibility of using low cost organic substrate for high frequency applications up to W band.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.