Finite element simulation of damage and failure predictions of relatively thick carbon fibre-reinforced laminated composite panels subjected to flat and round noses low velocity drop-weight impact

Abstract

Listen

Translate article

This work is concerned with the dynamic computational modelling of fibre-reinforced laminated composite panels subjected to low velocity drop-weight impacts. Wings and fuselage of aircraft structures are prone to tool (box) drop impacts during normal shipping and handling of component assembly and maintenance services. Flat nose impacts inflict localised barely visible internal damage that severely reduce compressive residual strength and might result in catastrophic failure during future operations. Hence it is important to have a better understanding of the impact response of composites to mitigate the damage and avert the unexpected failures. Many reported works on the topic are experimental, based on quasi-static indentations that take longer than contact time, and produce global deformations of thin panel where short time effects and through-thickness stresses are neglected. Hence dynamic model is needed to investigate impact behaviour of thick panels for detailed information. The present computational model includes short time effects and utilise through-thickness stresses in mode-based failure criteria to differentiate ply-by-ply failure modes. Cases of laminates up to 7.6mm thick impacted with flat and round (for comparisons) nose impactors were simulated using ABAQUS™/Explicit dynamic routine. High stress concentration regions were meshed with adaptive meshing techniques using reduced integration elements. Selected simulation results were compared against experimental, intra-simulation results, and the data available in the literature and found to be in acceptable agreement.