Abstract
Ferrite recrystallization and austenite formation occurring during annealing of cold-rolled advanced high-strength steels are key mechanisms as they largely determine the final microstructure and mechanical properties. However, the influence of processing parameters on these mechanisms and their interactions is still not fully understood. This is particularly the case for Dual-Phase steels having an initial cold-rolled microstructure consisting of ferrite and martensite before annealing, which were scarcely investigated compared to ferrite-pearlite initial microstructures. In situ synchrotron X-ray diffraction experiments together with post-mortem metallographic analysis allowed clarifying both ferrite recrystallization and austenite formation during annealing of a ferrite-martensite initial microstructure depending on the process parameters of the annealing cycle. Results showed a major influence of recrystallization state on austenite formation, leading to an unexpected effect of heating rate on austenite formation kinetics. A modeling approach was undertaken to rationalize the influence of heating rate on austenite formation by taking into account the bi-phased ferrite-martensite initial microstructure and the effect of ferrite recrystallization state.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.