Fabrication of Cu2ZnSn(S,Se)4 solar cells by printing and high-pressure sintering process

Abstract

ABSTRACTWe fabricated Cu2ZnSn(SxSe1-x)4 (CZTSSe) solar cells by a printing and high-pressure sintering (PHS) process. First, the CZTSSe solid solution powders were synthesized by heating the elemental mixtures at 550oC for 5 h in an N2 gas atmosphere. We fabricated CZTSSe films by a printing and high-pressure sintering (PHS) process. The obtained dense CZTSSe film was post-annealed at 550oC for 10 min under an N2 +5% H2S gas atmosphere. We fabricated CZTSSe solar cells with the device structure of Ag/ITO/i-ZnO/CdS/CZTSSe/Mo/soda-lime glass. The CZTSSe solar cell showed an efficiency of 2.1%, with Voc of 272 mV, Jsc of 18.0 mA/cm2 and FF of 0.44.