Abstract
This paper presents a novel form of Pb(Zr,Ti)O3 (PZT) thin film with a structure in which monocrystalline (Mono) PZT is sectioned with narrow mesh-like polycrystalline (Poly) PZT. The motivation is to overcome the inherent brittleness of piezoelectric Mono thin films. The design assumes that the Poly pattern will stop crack propagation within the Mono area. As a proof of concept, a Mono-Poly PZT composite thin film with a 20 μm-pitch and 2 μm-wide Poly pattern was sputter-deposited on a patterned underlayer on a Si substrate. Its piezoelectric properties were close to those of pure Mono PZT thin films, while its dielectric constant was significantly lower than those of pure Poly PZT thin films. Indentation tests confirmed the Poly patterns effectively stops crack propagation, which is likely to improve the mechanical durability of the overall film.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
