Exploiting RSM and ANN modeling methods to optimize phosphate ions removal using LDH/alginate composite beads

Abstract

In the present work, layered double hydroxide (MgAl) and alginate composite beads (LDH/alginate) were developed and used as low-cost and environmentally friendly adsorbent for phosphate ions removal. The successful incorporation of sodium alginate into the LDH structure was confirmed through SEM analysis. The dried beads exhibited a notably rough surface, which promotes molecular movement and potentially enhances pollutant adsorption. The pH of zero charge point (pHPZC) of the composite was found to be 7.41. This result implies that negative ions have a tendency to draw positive charges on the adsorbent surface via electrostatic interaction forces when the pH is lower than the pHPZC. On the other hand, a surface that has a pH higher than pHPZC mostly has a negative charge. The percentage removal and adsorption capacity were investigated as a function of contact time.Experiments were carried out by simultaneously varying three factors, in order to evaluate and compare the predictive capabilities of the response surface methodology (RSM) and the artificial neural network approach (ANN) for the adsorption process. Both methods demonstrated a strong ability to accurately predict the adsorption process. However, the response surface methodology exhibited a lower prediction error compared to the artificial neural network approach.The central composite design within response surface methodology (CCD-RSM) was employed to optimize the experimental conditions for the adsorption process. The model, which considers three factors: adsorbent dose (A), initial concentration (B), and contact time (C), proved to be significant. Among these, the quadratic term (B2) had the most substantial impact on the phosphate ion adsorption rate. The analysis yielded an R2 value of 0.94, indicating an excellent fit to the data. The findings suggest that increasing contact time and reducing the initial concentration improve phosphate ion removal efficiency, while the adsorbent dose has little to no effect. The Artificial Neural Network (ANN) model effectively predicted the adsorptive remediation of phosphate ions onto LDH/alginate composite beads, achieving a high coefficient of determination (R2 = 0.984) between the model outputs and the experimental data. The study highlights the significant potential of LDH/alginate composite beads as a natural adsorbent for the removal of phosphate ions from aqueous solutions. These results underscore the environmental friendliness and efficiency of the adsorbent used for phosphate adsorption.