Abstract
The quality of produced water in oil and gas field is complex and difficult to treat. Ultrasonic water treatment technology has a good effect on degradation of organic polymers and demulsification, but its application is limited due to energy consumption and other reasons, and it has not been industrialized in oil and gas field water treatment. Through ultrasonic mechanism research, water quality characteristics analysis and a large number of small simulation tests, the test results show that for complex produced water with high salt content, high turbidity and high emulsification, under the ultrasonic frequency of 39.5kHz, ultrasonic time of 30min and operation conditions of 25°C, the oil removal effect can be achieved at 66W power. The oil content is reduced from 77.9mg/L in the inlet water to 1.87mg/L in the outlet water, and the oil removal rate can reach more than 95% to meet the expected demand. In the case of the mature development of green electricity technology, this study provides a new technical idea for the efficient treatment of produced water in oil and gas fields, and provides a basic research basis for the industrial application of ultrasonic treatment process and the collaborative application of combined with other processes.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call