Experimental and theoretical investigations on the static behavior of low aspect ratio shear stud connectors in ultra high performance concrete

Abstract

In reinforcement project for early-built orthotropic steel bridge decks (OSDs) using ultra high performance concrete (UHPC), low aspect ratio shear stud connectors in UHPC are required. In present study, push-out tests of six static UHPC specimens with and without reinforcement bars were first conducted. The failure modes, load-slip curves and shear capacity of shear stud connectors embedded in UHPC with an aspect ratio of 1.84 were investigated. Subsequently, the experimental results of shear capacity and load-slip curves were compared with the theoretical calculation results. Finally, a new theoretical model of shear stiffness was proposed for low aspect ratio shear studs based on the energy equivalence theory. The experimental results indicated that the failure mode of all specimens was stud shank failure, while the UHPC slabs without reinforcement bars showed extensive cracks. The effect of reinforcement bars on the behavior of shear studs embedded in UHPC slabs can be negligible. The reinforcement bars mainly affected the internal force flow in the UHPC, thus limiting crack initiation and extension. The compressive strength of the UHPC and the weld collar had significant impact on the shear capacity of short studs in the UHPC. In calculating the load-slip curves of short shear stud connectors in UHPC, the theoretical results calculated using the fractional form equations were in better agreement with the experimental results. The proposed theoretical model neglecting the deformation of shear stud in elastic stage can accurately predict the shear stiffness of low aspect ratio shear stud connectors in UHPC.