Abstract
The turbulence structure in air intake S-shaped diffuser is proven to be influencing parameter on the diffuser performance. In the present research work, experimental and numerical investigations have been undertaken to explore the effect of inlet turbulence intensity level on the performance of air intake S-shaped diffuser. Detailed measurements including pressure and velocity at the inlet and outlet planes and static pressure on the top and bottom walls were taken at three pre-selected Reynolds numbers of 4.8×104, 6.4×104 and 7.5×104. The predicted corresponding turbulence intensities at the experimented three Re, were 4.16%, 3.15% and 2.8%. ANSYS-FLUENT 15 software with Standard k-ε turbulence model has been used for numerical simulations. Numerical results of static pressure recovery, total pressure loss coefficient and wall static pressure recovery have been compared with the experimental results. The experimental results indicate that increasing Reynolds number at the inlet of S-shaped diffuser resulting in slight decrease in measured turbulence intensity. Also, as Re increased from 4.8x104 to 7.5x104, the static pressure recovery increased by 9% and the total pressure loss coefficient was reduced by 4.9%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
