Evaluation of the calibration parameters of radiochromic films for patient dosimetry in interventional radiology

Abstract

The study aims to analyse the effects of beam energy, dose fractionation, response homogeneity, long-term fading and response sensitivity of radiochromic films. It also investigates the effect of the scanner, ambient temperature and storage conditions on the response of the films. The radiochromic films were irradiated at various air kerma from 20 mGy to about 8 Gy. Results showed that the response of the films is not energy dependent for low doses ranging from 300 to 700 mGy (coefficient of variation = 5-12%) but starts to show a slight dependence for high doses above 2 Gy (coefficient of variation = 20%). There is no significant difference (4%) in optical densities (OD) and pixel values when doses were fractionated and when using scanner with and without warm-up lamp. The curve fitting of OD and pixel values for the sensitivity test at different kilovolt potential gave an r(2) value of 0.99.