Enhancement of C/C-LAS joint using aligned carbon nanotubes prepared by injection chemical vapor deposition

Abstract

Carbon nanotubes (CNTs) enhanced carbon/carbon-lithium aluminum silicate (C/C-LAS) joint was prepared by a three-step technique of pack cementation, injection chemical vapor deposition (ICVD) and hot-pressing. A layer of aligned CNTs was grown on the surface of SiC coated C/C composites by ICVD method, and the joint was obtained by hot-pressing with magnesium aluminum silicate (MAS) as the interlayer. SEM observation reveals that the introduced CNTs result in the formation of a dense and crack-free CNT/MAS nanocomposite interface between SiC and MAS. Compared with the joints without CNTs, the average shear strength of the joints reinforced by CNTs was improved by 48% accompanied by an obvious change in failure mode from brittle fracture without CNTs to plastic fracture with CNTs. The pulling-out and bridging of CNTs on the fracture surfaces had a positive effect on the strength enhancement of the C/C-LAS joint.