Abstract
The electroplating of the gate electrode on a flexible polyimide (PI) substrate was successfully applied to the fabrication of inverted-staggered poly(3-hexylthiophene) (P3HT) organic thin film transistors (OTFTs). The Ni gate electrode was electroplated through patterned negative photo-resist (KMPR) masks onto Cu (seed)/Cr (adhesion) layers that had been sputter-deposited on O 2-plasma-treated PI substrates. The electrical measurements of the fabricated OTFTs with the SiO 2 gate insulator indicated non-ideal output characteristics, which are similar to the model of electrical transport by a space-charge limited current (SCLC). The use of a poly(4-vinyl phenol) (PVP) and SiO 2/PVP bilayer gate dielectric produced output characteristics that were closer to the ideal TFT behavior but led to a lower effective mobility and on/ off current ( I on/ I off).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.