Effects on the Microstructure Evolution and Properties of Graphene/Copper Composite during Rolling Process.

Abstract

Rolling treatments have been identified as a promising fabrication and deformation processing technique for graphene/metal composites with high performance. However, it is still a challenge to choose appropriate rolling parameters to achieve high strength, ductility and electrical conductivity of the composite simultaneously. In this study, graphene/Cu composites were prepared with an in situ growth method and rolling treatment. The effects of rolling deformation and temperature on the microstructural evolution of graphene and Cu grains, interface bonding between graphene and the matrix, mechanical and electrical properties were systemically investigated. The cold-rolled composite with 85% deformation displayed a maximum ultimate strength of 548 MPa, a high elongation of 8.8% and a good electrical conductivity of 86.2% IACS. This is attributed to oriented graphene arrangement and matrix grain refinement. Our research provides a comprehensive understanding for the rolling behavior of graphene/Cu composites, and can promote the development of graphene-based composites with high performance.