Abstract
In this study, MoCu20/Cu joints via eutectic bonding recipe with AuSn20 solder were obtained to investigate the effect of γ-ray irradiation on the microstructure and mechanical properties of the solder joints. Firstly, the experimental results showed that the number and size of voids in joints were gradually increased during irradiating process due to the migration and agglomeration of irradiation-induced vacancies. Secondly, the (Au,Ni)Sn and (Ni,Au)3Sn2 IMC layers and Au-rich joints were formed by the activation of interfacial reaction between Au–Sn solder and plating metal. Thirdly, the failure mode was altered from ductile fracture to brittle fracture, and the shear strength of joint was decreased by 37.23% after 1000 h γ-ray irradiation in the results of mechanical test. In summary, the γ-ray irradiation has a highly detrimental influence on the AuSn20 solder joint.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
