Abstract
The advantages of the direct combustion of agricultural biomass for power generation are restricted due to the drawbacks of this biomass and the deep peak shaving trend. Hydrothermal carbonization can improve the physical and thermochemical properties of raw materials. Corn stalk samples were selected as the research object in this study. Corn stalk hydrochars were prepared with reaction pressures of 0–3 MPa, reaction temperatures of 160–240 °C, and residence times of 1–10 h. The effects of the process parameters on the physicochemical properties of hydrochar and on the removal of alkali and alkaline earth metals (AAEMs) were studied by measuring the hydrochar mass, energy yield, product composition, morphology, as well as the removal efficiency of AAEMs. The results indicated that the corn stalk hydrochar had higher mass and energy yields than the raw corn stalk. X-ray diffraction showed that the carbon content in the hydrochar was greater than that in raw corn stalk. Scanning electron microscopy showed that the reaction temperature played a more significant role in the hydrothermal carbonization process than the reaction pressure and residence time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
