Design and verification of monitoring system of DC microgrid based on Ethernet communication

Abstract

AbstractReal‐time acquisition of microgrid (MG) operation data and remote control play a crucial role in the safe and stable operation of MG. A design scheme of monitoring system is proposed for the wind/photovoltaic/energy storage islanded direct current MG. The core controllers used in direct current MG system are programmable logic controller and digital signal processor. The monitoring system mainly adopts Ethernet communication, together with serial port communication mode Recommend Standard 232 (RS232) and Recommended Standard 485 (RS485) communication modes. A heterogeneous networking is built with controllers and data display instruments. Different monitoring interfaces are designed, the important information can be real‐time detected, collected and displayed. The multi‐energy and multi‐load dispatching operation control are realized according to scheduling operation plan. The parameters of the inverter can be adjusted, and the output voltage waveform and sinusoidal pulse width modulation waveform of the inverter can be measured. The communication of the proposed monitoring system is reliable, flexible and expandable, and easy to realize remote operation control. Moreover, the detection and control functions can be extended further. Through experiments, the effective control and monitoring of the designed monitoring system is verified, and the intelligent management is realized.