Effects of dental tissue substructure and size on fracture strengths of lithium disilicate and zirconia ceramics

Abstract

We aimed to assess the effects of standard resin preparation models with five different thicknesses of occlusal surface on the fracture strengths of zirconia (ZrO2) and lithium disilicate glass ceramics. The specimens of 10 first maxillary molars collected between January 2019 and January 2020 were selected. Standard mathematical models were formed after scanning the resin matrices using software. The full crowns with five different thicknesses of occlusal surface were established, among which the molar specimens prepared by ZrO2 glass ceramic composites alone were assigned into ZrO2 group (n=5, 40 specimens) while those prepared using ZrO2-lithium disilicate glass ceramic composites were allocated into ZTCLDC group (n=5, 40 specimens). When the thickness of glass-ceramic full crowns was 0.5, 0.8, 1.0, 1.2 and 1.5 mm, the fracture load of the specimens in ZTCLDC group was not significantly different from that in ZrO2 group, and there was no significant difference in the three-point flexural strength between ZTCLDC group and ZrO2 group (P>0.05). The fracture toughness was not significantly different between the two groups in the case of the thickness of glass-ceramic full crown at 0.5, 0.8, 1.0, 1.2 and 1.5 mm (P>0.05). The thickness was positively correlated with fracture load, three-point flexural strength and fracture toughness (P<0.05). The fracture strength of lithium disilicate and ZrO2 ceramics is directly proportional to the thickness of ZrO2 and ZTCLDC crowns.