Abstract
ZnO-added 0.41PNN–0.36PT–0.23PZ ceramics cannot be sintered below 950°C. However, when CuO is added, the liquid phase forms and specimens can be sintered even at 850°C. The dielectric constant (εT3/εo), piezoelectric constant (d33) and electromechanical coupling factor (kp) increase with the addition of CuO and this is due to the enhancement of the density of the specimens. When CuO is added to 0.41PNN–0.36PT–0.23PZ ceramics, improvements of density, εT3/εo, d33 and kp are also observed. However, the d33 and kp values of the CuO-added 0.41PNN–0.36PT–0.23PZ ceramics are less than those of the CuO- and ZnO-added specimens. Therefore, ZnO is effective in improving the piezoelectric properties of 0.41PNN–0.36PT–0.23PZ ceramics. Good dielectric and piezoelectric properties of d33=575(pC/N), kp=0.55 and εT3/εo= 3900 are obtained for 0.41PNN–0.36PT–0.23PZ+3.0 mol% ZnO with 1 mol% CuO sintered at 900°C for 2 h.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call