Abstract

Titanium-Silicon Oxynitride (TiSiNO) coatings were synthetized by reactive co-sputtering technique on stainless steel 304 substrates varying the substrate temperature during the deposition. Two targets were used simultaneously, the first one of Ti on a DC source at 100 W and the second was a Ti-Si-O target on a pulsing RF source at 180 W. X-ray diffraction identified three crystalline phases: titanium nitride (TiN), titanium oxide (TiO) and silicon oxide (SiO2), where the SiO2 phase presented compressive stresses at low temperatures and tension stresses at higher temperatures, along with a change in the preferential orientation. The coating obtained at 200 °C showed the higher hardness value of 14.8 GPa, attributed to a lower grain size and high compressive stress. Finally, all coatings presented high fracture toughness, since the was a lack of any type of crack for all applied load values.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call