Abstract
Hafnium carbide (HfC) films have been deposited on Si (100) substrates by direct current reactive magnetron sputtering. The microstructure, compressive stress, hardness and tribological behaviors show great dependence on carbon (C) concentration and chemical bonding state. With C content in HfCx films rising, phase transforms from hexagonal-close-packed (HCP) Hf(C) to face-centered-cubic (FCC) HfC, and nanocomposite structure consisting of HfCx nanocrystalline grains encapsulated by amorphous carbon (a-C) matrix forms at moderate C content. The hardness of HfCx films increases significantly from 10.4GPa (14at.% C) to 34.4GPa (58at.% C) and then keeps dropping with further increasing C content. a-C appears in HfCx films with more than 32at.% C and it obviously lowers coefficient of friction (COF). The wear resistance can be remarkably worsened by high compressive stress. The film with 76at.% C exhibits relatively high hardness and low compressive stress, good fracture toughness and self-lubrication transfer layer, showing great combination of the lowest COF of 0.10 and lowest wear rate of 1.10×10−6mm3/Nm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
