Abstract
Cu2SnS3 (CTS) thin films were synthesized by the sulfurization of stacked metallic precursor fabricated with a radio frequency magnetron sputtering method. The compositional, structural, morphological, optical and electrical properties of CTS thin films grown on soda lime glass substrates depend on the sulfurization temperature. The compositional analysis shows that all samples are in Sn-rich state. The ratio of Cu/Sn is close to the stoichiometric composition of CTS with increasing sulfurization temperature. The CTS thin films sulfurized at higher sulfurization temperature have better crystalline quality from the results of structural characterization. The CTS thin film obtained at sulfurization temperature 550°C exhibits higher degree of crystallization with larger average grain size. The transmission and reflectance spectra demonstrate the band gap is around 1.0eV, which is consistent with the estimation extrapolated from external quantum efficiency. The photoelectric properties of solar cell are enhanced with the increase of sulfurization temperature. The solar cell fabricated with the CTS absorber layer annealed at 550°C has the efficiency up to 0.28% for a 0.16cm2 area.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call