Abstract
The effect of pressure and temperature on the structural changes of admixtures of cBN, Al and Ti(C0.5N0.05) or Ti(C0.5N0.5)0.6 mechanically alloyed powders with 40mass% W were investigated by means of the X-ray diffraction technique. It emerged that pressure and temperature affected the crystal structures and compositions of the binder phases as well as the behaviour of the contaminating Fe. High pressure–high temperature (HPHT) sintering favoured the formation of Ti(W,Al)(C,N) solid-solutions, whereas vacuum annealing favoured the formation of W(Ti,Al) solid-solutions. Products of Ti(C,N)-based crystal lattices remained stable under high pressure (5GPa), whereas W based crystal lattices were more stable under vacuum (0.001Pa). Inert single phase binders were formed in HPHT sintered PcBN compacts. Formation of Ti(W,Al)(C,N) by reactions between mechanical alloyed Ti(W)(C,N) powder particles and liquid Al prevented the formation of AlN, AlB2, α-AlB12, TiN and TiB2 particles in PcBN compacts. Sintering of PcBN occurred by dissolution of B and N atoms in Ti(W,Al)(C,N) and re-precipitation on cBN particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have