Abstract
This study examined the effect of particle size distribution and content of limestone powder on the compressive response of high-early-strength portland cement mortars cured either in water or under ambient conditions. Nineteen mortar mixtures were classified into three groups based on the particle size distribution of the pulverized limestone powders: L (blaine = 3467 cm2/g), M (blaine = 4710 cm2/g), and H (blaine = 5764 cm2/g). The design equations for the compressive strength gain rates and stress–strain relationship of ordinary portland cement (OPC) concrete were adapted for the present mortars. The test results revealed that the 28-d compressive strength (fc′) of the mortars tended to decrease with an increase in limestone powder content, even for mortars containing 5 % limestone powder with small particle sizes. This contrasts with the common trend of the positive effect of limestone powder on the compressive strength of OPC concrete up to a certain substitution level. Furthermore, mortars containing finer limestone powders exhibited a greater rate of decrease in fc′, regardless of the curing conditions. The modified equations show promise for reliably assessing both the compressive strength gain rates at different ages and the stress–strain behavior of high-early-strength portland cement mortars containing limestone powders.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call