Abstract
Electron emission from molybdenum field emission microcathode arrays is sensitive to the contamination of the emitters by the residual gases. We studied the effects of O2 exposures on the emission properties of several Spindt type molybdenum field emitter arrays. The arrays were exposed to 0–10 000 L of O2 and the resulting changes in electron emission characteristics were measured. Exposure of the field emitters to O2 resulted in emission degradation ranging from 6.2±1.3% for 10 L to 99.2±0.4% for a 10 000 L exposure. The emission is recoverable for low exposures, but exposures beyond 1000 L result in permanent loss in emission current. We found that the degradation effects are similar in both the dc and pulsed modes of operation of the device. Therefore, dc mode testing can be used as an effective acceleration method in establishing the device lifetimes under various vacuum conditions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call