Effect of nickel oxide nanoparticles on protease activity in brewing industry

Abstract

Intensive use of nanoparticles on an industrial scale leads to an increase in their content in the environment. This increases the risks of nano-sized objects entering the technological chains of the processing industries of the agro-industrial complex, in particular, brewing. The paper presents the results of the studies of the effect of nickel oxide nanoparticles used in various industries on the activity of the proteolytic type of enzyme preparation Neutrase 1.5MG, as well as on the results of laboratory mashing of light barley malt. The effect of different concentrations of NiO nanoparticles on the accumulation of low molecular weight nitrogenous substances during gelatin hydrolysis in model media was determined. It was found that if the content of nanoparticles exceeds 0.25 mg/cm3, the proteolytic capacity of the enzyme preparation is reduced up to 70% compared to the control at the concentration of nickel oxide nanopreparation of 2.0 mg/cm3. The experiments showed that an increase in the duration of contact between nanoparticles and proteases of the enzyme preparation in the reaction medium did not lead to an increase in the inhibitory effect of the nano-sized NiO. The laboratory mashing revealed more pronounced negative effect of nickel oxide nanoparticles on the accumulation of low-molecular nitrogen compounds. It is determined that in the presence of NiO nanopreparation, the hydrolysis efficiency of the starchy components of light barley malt is reduced. As a result, according to a number of indicators (concentration of amine nitrogen, reducing substances), the first wort obtained by mashing in the presence of nickel oxide nanoparticles at both lower (0.25 mg/cm3) and higher (2.0 mg/cm3) concentrations is inferior to samples obtained in the absence of nano-sized particles. Based on the above data, it is concluded that the presence of NiO nanoparticles in brewing environments is undesirable.