Abstract
In general, the fly ash based geopolymer concrete/mortar needs heat activation for early strength developments depending on the molar concentration of activator. To overcome the above shortcomings, an experimental program has been taken up on low calcium fly ash geopolymer mortar having three molar concentrations (8M, 10M and 12M) of activator liquids along with different percentage of nano silica addition (0%, 4%, 6%, 8% and 10% of fly ash). Geopolymer mortar with the addition of 6% nano silica shows appreciable improvement in compressive, flexural and tensile strength at 28days under ambient temperature curing. The water absorption and charge passed in RCPT are also seemed to be comparatively less for 6% addition of nano silica modified geopolymer mortar. Such improvement of nano silica modified geopolymer mortar is due to transformation of amorphous compound to crystalline compound as noted in the XRD and FESEM analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.