Abstract

In this article, this research demonstrates the influence of in-situ introduction of H2 into the working gas on the physical properties of post-annealed In2O3 thin films and the performance of associated devices. A gradual increase in the H2 ratio leads to improved film quality, as indicated by spectroscopic ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscope analyses showing a reduction in defect states such as band-tail states and VO in the film, and a smoother surface morphology with the root mean square roughness approximately 0.446 nm. Furthermore, this hydrogen doping effect results in a distinct shift in the device’s threshold voltage toward the positive direction, and an improvement in the field-effect mobility and subthreshold swing. Consequently, a high-performance In2O3:H TFT is developed, exhibiting a field-effect mobility of 47.8 cm2/Vs, threshold voltage of −4.1 V and subthreshold swing of 0.25 V/dec. These findings highlight the potential of in-situ H doping as a promising approach to regulate In2O3-based TFTs.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call