Abstract
AbstractIt is a great challenge to improve the properties of pure calcium sulfate bone cement. Here, two calcium sulfate hemihydrate powders with different aspect ratios were prepared, and three chitosan addition methods were adopted to investigate the effect on the surface and interface properties of calcium sulfate/chitosan composite bone cement. The results showed that it lacked chemical bond between chitosan and calcium sulfate, and the short rod calcium sulfate displayed better interface adhesion with chitosan owing to its smaller size, so it possessed shorter setting time, better compressive strength and slower degradation than the long rod calcium sulfate, while the biocompatibility had no remarkable difference. Moreover, chitosan solution as liquid phase was a better solidification mode than citric acid, and calcium sulfate/chitosan composite as solid phase was the worst mode because of poor interface compatibility. Conclusively, it was a simple, low‐cost, and effective preparation process to choose short rod calcium sulfate powder as solid phase and 1 wt% chitosan solution as liquid phase, which could achieve calcium sulfate/chitosan composite bone cement with the best properties, including setting time, compressive strength, degradation rate, and biocompatibility, displaying a promising application in bone defect repair.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
