Anchorage of the femoral head prosthesis to the shaft of the femur.

Abstract

The Journal of Bone and Joint Surgery. British volumeVol. 42-B, No. 1 Clinical StudiesFree AccessANCHORAGE OF THE FEMORAL HEAD PROSTHESIS TO THE SHAFT OF THE FEMURJohn CharnleyJohn CharnleySearch for more papers by this authorPublished Online:1 Feb 1960https://doi.org/10.1302/0301-620X.42B1.28AboutSectionsPDF/EPUB ToolsAdd to FavouritesDownload CitationsTrack CitationsPermissions ShareShare onFacebookTwitterLinked InRedditEmail FiguresReferencesRelatedDetailsCited ByA novel antibacterial zirconia-containing PMMA bone cementJournal of the Mechanical Behavior of Biomedical Materials, Vol. 9Preparation and Biocompatibility of Poly Methyl Methacrylate (PMMA)-Mesoporous Bioactive Glass (MBG) Composite Scaffolds23 October 2021 | Gels, Vol. 7, No. 4Antibiotic cement coating in orthopedic surgery: a systematic review of reported clinical techniques23 December 2021 | Journal of Orthopaedics and Traumatology, Vol. 22, No. 1Calculation of Mass Attenuation Coefficients for Pedicle Screw by Monte Carlo Simulation15 November 2021 | Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen DergisiSynthetic Material for Bone, Periodontal, and Dental Tissue Regeneration: Where Are We Now, and Where Are We Heading Next?15 October 2021 | Materials, Vol. 14, No. 20Poly(methyl methacrylate) bone cement, its rise, growth, downfall and future20 November 2020 | Polymer International, Vol. 70, No. 9The Effects of Rasp Oversize on the Clinical and Radiographic Outcomes of Total Hip Arthroplasty With a Collared Satin-Finished Composite Beam Cemented StemThe Journal of Arthroplasty, Vol. 36, No. 6Influence of HRGO Nanoplatelets on Behaviour and Processing of PMMA Bone Cement for Surgery21 June 2021 | Polymers, Vol. 13, No. 12Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide11 February 2021 | Journal of Biomaterials Applications, Vol. 35, No. 10Mechanical and morphological characterization of PMMA/bone composites in human femoral headsJournal of the Mechanical Behavior of Biomedical Materials, Vol. 115Research status of artificial bone materials4 November 2019 | International Journal of Polymeric Materials and Polymeric Biomaterials, Vol. 70, No. 1Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives15 January 2021 | Molecules, Vol. 26, No. 2Permanent Polymethyl Methacrylate Antibiotic Spacer for Definitive Management of Failed Total Ankle Replacements1 May 2021Corta reseña de la historia de la artroplastia de caderaOrtho-tips, Vol. 17, No. 2Cementless fixation techniques and problemsAcrylic cements for bone fixation in joint replacementPoly(methyl methacrylate)-Based Composite Bone Cements With Different Types of Reinforcement AgentsSwelling behavior of expandable poly(methyl methacrylate‐acrylic acid)/polymethyl methacrylate bio‐composites with different crosslinking densities25 June 2020 | Journal of Applied Polymer Science, Vol. 137, No. 48Use of Deep Learning Networks and Statistical Modeling to Predict Changes in Mechanical Parameters of Contaminated Bone Cements28 November 2020 | Materials, Vol. 13, No. 23Optimization of the formulation of an original hydrogel-based bone cement using a mixture designJournal of the Mechanical Behavior of Biomedical Materials, Vol. 110Biomechanical Comparison of Pull-out Strength of Different Cementation and Pedicle Screw Placement Techniques in a Calf Spine Model20 July 2020 | Indian Journal of Orthopaedics, Vol. 54, No. S1Effects of temperature increase during surgical drilling in acrylic resinTechnology and Health Care, Vol. 28, No. 4Polymethyl Methacrylate-Based Bone Cements Containing Carbon Nanotubes and Graphene Oxide: An Overview of Physical, Mechanical, and Biological Properties30 June 2020 | Polymers, Vol. 12, No. 7How does paraffin wax prevent evaporation of acrylic‐based syrups dedicated to fiber‐reinforced composite processing?8 November 2019 | Journal of Applied Polymer Science, Vol. 137, No. 20Absorptive and expansive behaviors of poly(methyl methacrylate-co-acrylic acid) bone cementColloids and Surfaces B: Biointerfaces, Vol. 189Current concepts and outcomes in cemented femoral stem design and cementation techniques: the argument for a new classification systemAdrian J. Cassar-Gheiti, Rosie McColgan, Martin Kelly, Theresa M. Cassar-Gheiti, Paddy Kenny, Colin G. Murphy2 April 2020 | EFORT Open Reviews, Vol. 5, No. 4PEG/SBA-15-containing acrylic bone cement with enhanced drug releaseChemical Engineering Science, Vol. 215HEMA‐Modified Expandable P(MMA‐AA) Bone Cement with Dual Water Absorption Networks7 February 2020 | Macromolecular Materials and Engineering, Vol. 5Osteogenesis enhancement of silk fibroin/ α-TCP cement by N-acetyl cysteine through Wnt/β-catenin signaling pathway in vivo and vitroJournal of the Mechanical Behavior of Biomedical Materials, Vol. 101Osteoinductive and Osteoconductive Biomaterials29 February 2020Fabrication of Stimuli-Responsive Polymers and their Composites: Candidates for Resorbable Sutures4 March 2020Description and Definition of Adhesives, and Related TerminologyTissue Engineering ScaffoldsOrthopedic ApplicationsBioceramics in Regenerative MedicineThe chitosan/tri-calcium phosphate bio-composite bone cement promotes better osteo-integration: an in vitro and in vivo study29 May 2019 | Journal of Orthopaedic Surgery and Research, Vol. 14, No. 1Percutaneous VertebroplastyNeuroimaging Clinics of North America, Vol. 29, No. 4Calcium Phosphate Bone Graft Substitutes with High Mechanical Load Capacity and High Degree of Interconnecting Porosity23 October 2019 | Materials, Vol. 12, No. 21Advanced biomaterials for repairing and reconstruction of mandibular defectsMaterials Science and Engineering: C, Vol. 103Influence of Ceramic Debris on Osteoblast Behaviors: An In Vivo Study28 August 2019 | Orthopaedic Surgery, Vol. 11, No. 5Antibiotic-Loaded Polymethylmethacrylate Beads and Spacers in Treatment of Orthopedic Infections and the Role of Biofilm Formation25 July 2019 | Frontiers in Microbiology, Vol. 10The use of a bioactive bone cement containing apatite-wollastonite glass-ceramic filler and bisphenol-a-glycidyl methacrylate resin for acetabular fixation in total hip arthroplastylong-term follow-up results of a clinical trialK. Goto, Y. Kuroda, T. Kawai, K. Kawanabe, S. Matsuda30 June 2019 | The Bone & Joint Journal, Vol. 101-B, No. 7Therapeutic Methacrylic Comonomers for Covalently Controlled Release from Mechanically Robust Bone Cement: Kinetics and Structure–Function Relationships9 May 2019 | Macromolecules, Vol. 52, No. 10Hip Arthroplasty24 April 2019Influence of N -acetyl cysteine (NAC) and 2-methylene-1,3-dioxepane (MDO) on the properties of polymethyl methacrylate (PMMA) bone cement1 January 2019 | RSC Advances, Vol. 9, No. 21Rheokinetic study of acrylic reactive mixtures dedicated to fast processing of fiber-reinforced thermoplastic composites18 December 2018 | Journal of Applied Polymer Science, Vol. 136, No. 15In Situ Generated Medical Devices4 March 2019 | Advanced Healthcare Materials, Vol. 8, No. 8Properties of an In Vivo Fractured Poly(Methyl Methacrylate) Cranioplasty After 15 YearsWorld Neurosurgery, Vol. 123Polymers for bone repairLong-term performance and failure of orthopedic devicesOrthopedic ImplantsTotal Hip Arthroplasty: Past, Present, and Future. What Has Been Achieved?Hip & Pelvis, Vol. 31, No. 4Bone Cement in Total Hip and Knee Arthroplasty1 December 2019 | JBJS Reviews, Vol. 7, No. 12Processing of Porous Stainless Steel by Compaction Method Using Egg Shell as Space Holder1 November 2018 | Key Engineering Materials, Vol. 791A versatile and injectable poly(methyl methacrylate) cement functionalized with quaternized chitosan-glycerophosphate/nanosized hydroxyapatite hydrogelsMaterials Science and Engineering: C, Vol. 90Uncemented Thompson’s hemiarthroplasty: safe, palliative and cost-effective surgery in the infirm patient—a consecutive series of 1445 cases8 February 2018 | European Journal of Orthopaedic Surgery & Traumatology, Vol. 28, No. 6Hydroxyapatite-polymer biocomposites for bone regeneration: A review of current trends26 June 2017 | Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 106, No. 5Wear Modeling of Polyethylene Based Polymer for Lubricated Conditions7 August 2018 | IOP Conference Series: Materials Science and Engineering, Vol. 394Fabrication and characterazation of functionalized zirconia microparticles and zirconia-containing bone cement6 July 2018 | Materials Research Express, Vol. 5, No. 7The “Magnesium Sacrifice” Strategy Enables PMMA Bone Cement Partial Biodegradability and Osseointegration Potential12 June 2018 | International Journal of Molecular Sciences, Vol. 19, No. 6Polished Cemented Femoral Stems Have a Lower Rate of Revision Than Matt Finished Cemented Stems in Total Hip Arthroplasty: An Analysis of 96,315 Cemented Femoral StemsThe Journal of Arthroplasty, Vol. 33, No. 5Cemented Compared with Uncemented Femoral Fixation in the Arthroplasty Treatment of Displaced Femoral Neck Fractures10 April 2018 | JBJS Reviews, Vol. 6, No. 4The era of biofunctional biomaterials in orthopedics: what does the future hold?31 January 2018 | Expert Review of Medical Devices, Vol. 15, No. 3Some Problems Biocompatible Materials Used for Making Endoprostheses Ankle9 August 2017Phase Changeable Liquid Metal as Injectable and Reversible Bone Cement15 July 2018Cementless Total Hip Arthroplasty Using the COREN Hip System: A Minimum Five-Year Follow-up StudyHip & Pelvis, Vol. 30, No. 3METHODS FOR THE CHARACTERIZATION OF THE LONG-TERM MECHANICAL PERFORMANCE OF CEMENTS FOR VERTEBROPLASTY AND KYPHOPLASTY: CRITICAL REVIEW AND SUGGESTIONS FOR TEST METHODS15 January 2018 | Journal of Mechanics in Medicine and Biology, Vol. 17, No. 08Synthesis and Characterization of an Injectable and Hydrophilous Expandable Bone Cement Based on Poly(methyl methacrylate)10 November 2017 | ACS Applied Materials & Interfaces, Vol. 9, No. 46Osteoconductive Amine-Functionalized Graphene–Poly(methyl methacrylate) Bone Cement Composite with Controlled Exothermic Polymerization21 August 2017 | Bioconjugate Chemistry, Vol. 28, No. 9Advances in the local and targeted delivery of anti-infective agents for management of osteomyelitis1 September 2017 | Expert Review of Anti-infective Therapy, Vol. 15, No. 9Atualização em artroplastia total de quadril: uma técnica ainda em desenvolvimentoRevista Brasileira de Ortopedia, Vol. 52, No. 5Total hip arthroplasty: a still evolving techniqueRevista Brasileira de Ortopedia (English Edition), Vol. 52, No. 5Graphene oxide versus graphene for optimisation of PMMA bone cement for orthopaedic applicationsMaterials Science and Engineering: C, Vol. 77Superficial Vancomycin Coating of Bone Cement in Orthopedic Revision Surgery: A Safe Technique to Enhance Local Antibiotic ConcentrationsThe Journal of Arthroplasty, Vol. 32, No. 5Bone Response to Porous Poly(methyl methacrylate) Cement Loaded with Hydroxyapatite Particles in a Rabbit Mandibular ModelTissue Engineering Part C: Methods, Vol. 23, No. 5Once upon a time.... Dual mobility: history19 December 2016 | International Orthopaedics, Vol. 41, No. 3Biomaterials in orthopaedic implantsAcrylic bone cements for joint replacementIntroduction to Biomaterials and Devices for Bone Disorders7.2 Bone Cement ☆Modified Bone Cement: A Reprieve for Horizontal Bone Defects1 January 2017 | World Journal of Dentistry, Vol. 8, No. 5The relative merits of cemented and uncemented prostheses in total hip arthroplastyIndian Journal of Orthopaedics, Vol. 51, No. 4Acrylic bone cement and starch: Botanical variety impact on curing parameters and degradabilityMaterials Science and Engineering: C, Vol. 69Implants and implant reactionsDiagnostic Histopathology, Vol. 22, No. 10Acrylic bone cements modified with poly(ethylene glycol)-based biocompatible phase-change materials10 June 2016 | Journal of Applied Polymer Science, Vol. 133, No. 36Tough photopolymers based on vinyl esters for biomedical applications9 February 2016 | Journal of Polymer Science Part A: Polymer Chemistry, Vol. 54, No. 13Morphological and mechanical characterization of composite bone cement containing polymethylmethacrylate matrix functionalized with trimethoxysilyl and bioactive glassJournal of the Mechanical Behavior of Biomedical Materials, Vol. 59Cemented femoral fixation: A North Atlantic divideSeminars in Arthroplasty, Vol. 27, No. 1Bone Cements: Acrylic26 January 2016Biological Response to Orthopedic Implants and BiomaterialsNondegradable synthetic polymers for medical devices and implantsThe effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement4 January 2016 | Biomatter, Vol. 6, No. 1The Current Concepts of Total Hip ArthroplastyHip & Pelvis, Vol. 28, No. 4Comparison of human mesenchymal stem cells proliferation and differentiation on poly(methyl methacrylate) bone cements with and without mineralized collagen incorporation20 April 2015 | Journal of Biomaterials Applications, Vol. 30, No. 6Bone Tissue Engineering: Synthetic and Natural Polymers and Composites of4 December 2015Osseous vitality in single photon emission computed tomography/computed tomography (SPECT/CT) after balloon tibioplasty of the tibial plateau: a case series17 November 2015 | BMC Medical Imaging, Vol. 15, No. 1Does osteoporosis reduce the primary tilting stability of cementless acetabular cups?21 April 2015 | BMC Musculoskeletal Disorders, Vol. 16, No. 1Silicon (Si) containing bone cements: a review25 February 2016 | Materials Technology, Vol. 30, No. sup5Experimental Tensile Tests on Bone Cement: Effect of Test Sample Shape1 September 2015 | Key Engineering Materials, Vol. 665New Cementless Fixation in Hip Arthroplasty: A Radiostereometric Analysis18 January 2018 | HIP International, Vol. 25, No. 5The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements14 April 2015 | Journal of Biomaterials Applications, Vol. 30, No. 3Antibiotic-laden PMMA bead chains for the prevention of infection in compound fractures: current state of the art9 June 2015 | European Journal of Orthopaedic Surgery & Traumatology, Vol. 25, No. 6An Experimental Study to Determine the Role of Inferior Vena Cava Filter in Preventing Bone Cement Implantation Syndrome22 July 2015 | Iranian Journal of Radiology, Vol. 12, No. 3Schenkelhalsfraktur15 July 2015 | Humanmedizin kompakt, Vol. 152Biomaterials for Bone Regenerative Engineering7 April 2015 | Advanced Healthcare Materials, Vol. 4, No. 9Physicochemical properties and in vitro mineralization of porous polymethylmethacrylate cement loaded with calcium phosphate particles21 June 2014 | Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 103, No. 3Schenkelhalsfraktur27 February 2015 | Der Unfallchirurg, Vol. 118, No. 3Self-Curing Systems for Regenerative Medicine30 January 2015Introduction to Biomaterials16 January 2015Autonomic Healing of Acrylic Bone Cement13 August 2014 | Advanced Healthcare Materials, Vol. 4, No. 2Bone cements for percutaneous vertebroplasty and balloon kyphoplasty: Current status and future developmentsJournal of Orthopaedic Translation, Vol. 3, No. 1Silicate bioceramic/PMMA composite bone cement with distinctive physicochemical and bioactive properties1 January 2015 | RSC Advances, Vol. 5, No. 47Introduction to biomaterials and medical device-associated infectionsCompressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty23 March 2014 | Biomechanics and Modeling in Mechanobiology, Vol. 13, No. 6A self-healing biomaterial based on free-radical polymerization7 October 2013 | Journal of Biomedical Materials Research Part A, Vol. 102, No. 9Determinate the Fracture Toughness of PMMA Cement1 September 2014 | Advanced Materials Research, Vol. 1030-1032Preparation and characterization of a poly(methyl methacrylate) based composite bone cement containing poly(acrylate- co -silane) modified hydroxyapatite nanoparticles10 March 2014 | Journal of Applied Polymer Science, Vol. 131, No. 15Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomersMaterials Science and Engineering: C, Vol. 40Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine modelJournal of the Mechanical Behavior of Biomedical Materials, Vol. 32Bone-Cement Interface in Total Joint Arthroplasty4 October 2013Influencia del medio fisiológico sobre las propiedades mecánicas del cemento óseo. ¿Son los estudios actuales extrapolables?Revista Española de Cirugía Ortopédica y Traumatología, Vol. 58, No. 1Influence of the physiological medium on the mechanical properties of bone cement: Can current studies be extrapolated?Revista Española de Cirugía Ortopédica y Traumatología (English Edition), Vol. 58, No. 1Fixation techniques of total hip arthroplasty (THA) componentsCementless fixation techniques and challenges in joint replacementAcrylic cements for bone fixation in joint replacementNanoscale Chemical Interaction Enhances the Physical Properties of Bioglass Composites9 September 2013 | ACS Nano, Vol. 7, No. 10Low-modulus Mg/PCL hybrid bone substitute for osteoporotic fracture fixationBiomaterials, Vol. 34, No. 29Studies of Carboxyl-Functionalized Multi-Wall Carbon Nanotubes and Mechanical Properties of its MWCNTs-OPC Cement Composites1 September 2013 | Advanced Materials Research, Vol. 774-776The bone-to-cement interface improvement by ca-phosphate ceramics24 April 2013 | Microscopy Research and Technique, Vol. 76, No. 7The behavior of new hydrophilic composite bone cements for immediate loading of dental implant1 June 2013 | Journal of Wuhan University of Technology-Mater. Sci. Ed., Vol. 28, No. 3Clinical Application of Total Hip Replacement5 April 2013Serum Levels of Methyl Methacrylate Following Inhalational Exposure to Polymethylmethacrylate Bone CementThe Journal of Arthroplasty, Vol. 28, No. 3Safety and utility of a PMMA-based tissue adhesive for closure of surgical incision wounds13 August 2012 | Journal of Biomaterials Science, Polymer Edition, Vol. 24, No. 3Bridging Polymer Science and Medicine Through Supramolecular Nanoassemblies6 November 2013Carbon Nanotubes in Acrylic Bone Cement2 August 2012Introduction and Sco peHistory of PMMA cementOrthopedic ApplicationsAdhesives and SealantsLayered double hydroxide induced advancement in joint prosthesis using bone cement: the effect of metal substitutionJournal of Materials Chemistry B, Vol. 1, No. 17Materials used for hip and knee implantsBiomaterial strategies to modulate cancerPolymethylmethacrylate bone cements and additives: A review of the literatureWorld Journal of Orthopedics, Vol. 4, No. 2Bone cement in arthroplastyOrthopaedics and Trauma, Vol. 26, No. 6Bone cement/layered double hydroxide nanocomposites as potential biomaterials for joint implant26 June 2012 | Journal of Biomedical Materials Research Part A, Vol. 100A, No. 12Phosphorylated Pullulan Bioadhesive for Regeneration and Reconstruction of Bone and Tooth1 November 2012 | Key Engineering Materials, Vol. 529-530Calcium Phosphates and Nanocrystalline Apatites for Medical Applications17 August 2012Evaluation of the in vitro cell-material interactions and in vivo osteo-integration of a spinal acrylic bone cement3 August 2011 | European Spine Journal, Vol. 21, No. S6Bulk properties and bioactivity assessment of porous polymethylmethacrylate cement loaded with calcium phosphates under simulated physiological conditionsActa Biomaterialia, Vol. 8, No. 8Development of strong and bioactive calcium phosphate cement as a light-cure organic–inorganic hybrid13 April 2012 | Journal of Materials Science: Materials in Medicine, Vol. 23, No. 7Prothesenregister und Langzeitergebnisse20 October 2011Protein−Bioceramic Interactions at the Interface12 December 2012Nanotechnology for cartilage and bone regenerationAn optimal control problem in estimating the cooling condition for a cemented hip replacement systemApplied Mathematical Modelling, Vol. 35, No. 11Assessment of Mechanical Parameters of PMMA Used in Human Body1 November 2011 | Advanced Materials Research, Vol. 409Bone bonding ability and handling properties of a titania–polymethylmethacrylate (PMMA) composite bioactive bone cement modified with a unique PMMA powderActa Biomaterialia, Vol. 7, No. 10The contribution of the micropores in bone cement surface to generation of femoral stem wear in total hip replacementTribology International, Vol. 44, No. 11Bone Cement: Perioperative Issues, Orthopaedic Applications and Future Developments1 September 2011 | Journal of Perioperative Practice, Vol. 21, No. 9Toughening of bone cement using nanoparticle: The effect of solvent28 February 2011 | Journal of Applied Polymer Science, Vol. 121, No. 2References31 May 2011Mechanism of Chromium Oxide Formation in Cobalt-Chromium-Molybdenum (F75) Alloys Prepared Using Spark Plasma Sintering4 March 2011 | Advanced Engineering Materials, Vol. 13, No. 57 EndoprothetikBone CementThe Significance of the Micropores at the Stem–Cement Interface in Total Hip Replacement2 April 2012 | Journal of Biomaterials Science, Polymer Edition, Vol. 22, No. 7Nanostructured biomaterials for artificial tissues and organsOsteoblast and Fibroblast Culture Proliferation on Injectable Calcium Ceramics Polymer CompositeBioceramics Development and Applications, Vol. 1Pathophysiology of OsteolysisThe Journal of the Korean Hip Society, Vol. 23, No. 1The Classic: The Bonding of Prostheses to Bone by CementClinical Orthopaedics & Related Research, Vol. 468, No. 12Bioactive bone cement with a low content of titania particles without postsilanization: Effect of filler content on osteoconductivity, mechanical properties, and handling characteristics21 September 2010 | Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 95B, No. 2An Investigation into the Fracture Mechanical Behavior of Bone Cement: Simulation Using Cohesive Zone Models (CZMs)1 October 2010 | Advanced Materials Research, Vol. 156-157Nanomaterials for Improved Orthopedic and Bone Tissue Engineering Applications6 July 2010Evaluation of peroxide initiators for radical polymerization-based self-healing applications14 May 2010 | Journal of Polymer Science Part A: Polymer Chemistry, Vol. 48, No. 12A nonlinear inverse problem in estimating the polymerization heat source of bone cements by an iterative regularization method21 May 2010 | Inverse Problems, Vol. 26, No. 6Osteoblast response to polymethyl methacrylate bioactive glass composite17 February 2010 | Journal of Materials Science: Materials in Medicine, Vol. 21, No. 5Recent Developments in Total Hip Replacements: Cementation, Articulation, Minimal-Invasion and Navigation1 April 2010 | Journal of Perioperative Practice, Vol. 20, No. 4Influence of lactose addition to gentamicin-loaded acrylic bone cement on the kinetics of release of the antibiotic and the cement propertiesActa Biomaterialia, Vol. 6, No. 3Evaluating Tribological Properties of Materials for Total Joint Replacements Using Scanning Probe Microscopy25 November 2009Bonding ability evaluation of bone cement on the cortical surface of rabbit’s tibia1 September 2009 | Journal of Materials Science: Materials in Medicine, Vol. 21, No. 1The Role of Polymethylmethacrylate Antibiotic–loaded Cement in Addition to Debridement for the Treatment of Soft Tissue and Osseous Infections of the Foot and AnkleThe Journal of Foot and Ankle Surgery, Vol. 49, No. 1Fabrication and Strength Evaluation of Biocompatible Ceramic-Metal Composite MaterialsJournal of Solid Mechanics and Materials Engineering, Vol. 4, No. 11Acrylic bone cements for joint replacementSelected polymeric materials for orbital reconstructionStudies on biodegradation of crosslinked hydroxy terminated-poly(proplyene fumarate) and formation of scaffold for orthopedic applications27 June 2008 | Journal of Materials Science: Materials in Medicine, Vol. 20, No. S1Polyethylene wear analysis23 November 2009 | Acta Orthopaedica, Vol. 80, No. sup337Locally-administered antibiotics in wounds in a limbJ. G. Branstetter, S. R. Jackson, W. O. Haggard, K. C. Richelsoph, J. C. Wenke1 August 2009 | The Journal of Bone and Joint Surgery. British volume, Vol. 91-B, No. 8Bone attachment to glass-fibre-reinforced composite implant with porous surfaceActa Biomaterialia, Vol. 5, No. 5Does Increased Bone–Cement Interface Strength have Negative Consequences for Bulk Cement Integrity? A Finite Element Study16 December 2008 | Annals of Biomedical Engineering, Vol. 37, No. 3The development of a nanocrystalline apatite reinforced crosslinked hyaluronic acid–tyramine composite as an injectable bone cementBiomaterials, Vol. 30, No. 5Bone ingrowth into porous silicon nitrideJournal of Biomedical Materials Research Part A, Vol. 9999ABiomaterials for Tissue Engineering of Hard Tissues4 December 2008Entwicklung und aktueller Stand der HüftendoprothetikPolymers for bone repairBiomaterials in orthopaedics30 July 2008 | Journal of The Royal Society Interface, Vol. 5, No. 27Implant, Total Hip4 September 2015Femoral stem wear in cemented total hip replacement16 July 2008 | Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 222, No. 5Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technologyMaterials Science and Engineering: C, Vol. 28, No. 3Static shear strength between polished stem and seven commercial acrylic bone cements10 July 2007 | Journal of Materials Science: Materials in Medicine, Vol. 19, No. 2A review on the polymer properties of Hydrophilic, partially Degradable and Bioactive acrylic Cements (HDBC)Progress in Polymer Science, Vol. 33, No. 2Injectable Biomaterials in SurgeryInfluence of femoral stem surface finish on the apparent static shear strength at the stem–cement interfaceJournal of the Mechanical Behavior of Biomedical Materials, Vol. 1, No. 1Cementless fixation techniques in joint replacementBone cement fixation: acrylic cementsCommercial aspects and delivery systems of bone cementsAcrylic bone cement: genesis and evolutionPoly(methylmethacrylate) bone cement: chemical composition and chemistryModifications of bone cementsWann wird zementiert?31 October 2007 | Trauma und Berufskrankheit, Vol. 9, No. S3Preparation and characterization of bone cements incorporated with montmorillonite1 January 2007 | Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 83B, No. 1The operation of the century: total hip replacementThe Lancet, Vol. 370, No. 9597Novel tricalcium silicate/monocalcium phosphate monohydrate composite bone cement1 January 2007 | Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 82B, No. 2The Effect of Cross-Sectional Stem Shape on the Torsional Stability of Cemented Implant Components14 November 2006 | Journal of Biomechanical Engineering, Vol. 129, No. 3Relationship between bone ingrowth, mineral apposition rate, and osteoblast activity1 January 2007 | Journal of Biomedical Materials Research Part A, Vol. 81A, No. 2Biological response of new activated acrylic bone cements with antiseptic properties. Histomorphometric analysis11 January 2007 | Journal of Materials Science: Materials in Medicine, Vol. 18, No. 5Wear characteristic and biocompatibility of some hydroxyapatite–collagen composite acetabular cupsWear, Vol. 262, No. 11-12Preparation and Characterization of Bone Cements Incorporated with MontmorilloniteMacromolecular Symposia, Vol. 249-250, No. 1Bilateral total knee replacement under a single anaesthetic, using a cementless implant is not unsafe26 August 2006 | Knee Surgery, Sports Traumatology, Arthroscopy, Vol. 15, No. 3Biomineralization of Glass Fibre Reinforced Porous Acrylic Bone Cement1 February 2007 | Key Engineering Materials, Vol. 330-332Analysis and Characterization of Alumina Particles Reinforced Ultra High Molecular Weight Polyethylene Composite for Acetabular Cup10 January 2018 | The International Journal of Artificial Organs, Vol. 30, No. 2Avaliação da qualidade de vida dos pacientes idosos com fratura do colo do fêmur tratados cirurgicamente pela artroplastia parcial do quadrilActa Ortopédica Brasileira, Vol. 15, No. 4Desenvolvimento de scaffolds bioativos do compósito polimetilmetacrilato e hidroxiapatita: análise in vitroMaterials for Bone and Joint Replacement15 September 2006The biocompatibility and osteoconductivity of a cement containing β–TCP for use in vertebroplasty1 January 2006 | Journal of Biomedical Materials Research Part A, Vol. 78A, No. 3Effects of additives on the rheological properties and injectability of a calcium phosphate bone substitute materialJournal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 78B, No. 2Die Humeruskopfmehrfragmentfraktur – Versorgung mit einer Humeruskopfprothese?Der Orthopäde, Vol. 35, No. 8Evaluation of the Learning Curves Associated with Uncemented Primary Total Hip Arthroplasty Depending on the Experience of the Surgeon24 January 2018 | HIP International, Vol. 16, No. 3The effect of protein adsorption on the friction behavior of ultra-high molecular weight polyethylene27 June 2006 | Tribology Letters, Vol. 22, No. 2Osteoprogenitor response to semi-ordered and random nanotopographiesBiomaterials, Vol. 27, No. 15Glass Fibre Reinforced Porous Bone Cement Implanted in Rat Tibia or Femur: Histological and Histomorphometric Analysis1 May 2006 | Key Engineering Materials, Vol. 309-311Bone Cement, Acrylic14 April 2006Orthopedic Bone Cement14 April 2006Graft copolymers of methyl methacrylate and poly([R]-3-hydroxybutyrate)