Abstract

In this study, we report the growth and characterization of VO2 films deposited on YSZ (001) substrate employing RF magnetron sputtering of vanadium pentoxide (V2O5) target in pure Ar gas ambient. The VO2 film growth has been carried out at ∼700 °C for ∼15 min at ∼100 W RF power with a flow rate of ∼20 sccm at Ar gas deposition pressure of ∼3, ∼6, ∼20, and ∼40 mTorr. x-ray diffractometry and Raman spectroscopy show that the nearly pure VO2 phase achieved at lower Ar pressure, e.g., ∼3 and ∼6 mTorr transform into a multiphase V-O system at ∼20 and ∼40 mTorr. This pattern is also supported by the electrical transport measurements through the occurrence of hysteretic IMT in films grown at ∼3 and ∼6 mTorr and the absence of this signature in these films deposited at ∼20 and ∼40 mtorr Ar pressure. The most pronounced with the strongest hysteresis is seen in the Y6 film, and therefore, the optimum growth pressure in the present study is ∼6 mTorr. The suppression of IMT in Y20 and Y40 is attributed to the appearance of other V-O phases, which smear out the phase transition. The activation energy of the insulating phase is estimated from the Arrhenius fit to the ρ-T data is found to be ∼0.223 eV at ∼3 mTorr Ar pressure which increases to ∼0.311 eV for ∼6 mTorr film in the cooling cycle. The low temperature (120K≤T≤300K) transport conduction in all VO2 films is governed by Efros-Shklovskii’s variable range hopping (ES-VRH) mechanism with a systematic relation between growth conditions and phase transition characteristics. Thus, Argon gas pressure plays a critical role in growth and brings out the feasibility of VO2 films growth by RF sputtering of oxide V2O5 target under Argon ambient only.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call