ECR ion sources at the Institute of Modern Physics: From classical to fully superconducting device

Abstract

Electron cyclotron resonance (ECR) ion sources are used for cyclotron complex and atomic physics research at the Institute of Modern Physics (IMP). Intense beams of highly charged gaseous and metallic ions could be produced by the IMP 14.5 GHz ECR ion source (LECR2-Lanzhou Electron Cyclotron Resonance Ion Source No. 2). A particular emphasis has been put on the production of metallic ion beams recently. Metallic ion beams of Mg, Ca, Fe, Ni, Cu, Zn, and Pb were tested at the IMP 14.5 GHz ECR ion source (LECR2) to improve beam intensities and long-term stability. A new ECR ion source (Lanzhou Electron Cyclotron Resonance Ion Source No. 3), an upgraded version of the IMP 14.5 GHz ECR (LECR2) but with double-frequency wave heating (10 GHz+14.5 GHz), is under commissioning. The preliminary results of this new source will be presented. To satisfy the requirements of the heavy ion cooling storage ring that is under construction at IMP, a fully superconducting ECR ion source (Lanzhou Electron Cyclotron Resonance Ion Source with Superconducting Coils) with a completely new structure is being developed for the production of intense heavy ion beams of very high charge states, such as Xe30+ and U40+. The superconducting magnet consists of three axial solenoid coils and six saddle-curved sextupole coils with a cold iron structure as field booster and clamp. At full excitation, this magnet assembly will produce maximum peak fields on axis of 4.0 T at the injection, 2.2 T at the extraction region, and a radial sextupole field of 2.0 T at plasma chamber wall. The design features and status of this new superconducting ECR ion source will be presented.