Abstract

This paper develops a methodology to determine the economic feasibility of implementing offshore wave energy farms on the Portuguese continental coast. This methodology follows several phases: the geographic phase, the energy phase, the economic phase, and the restrictions phase. First, in the geographic phase, the height and the period of the waves, the bathymetry, the distance from the farm to the shore, from farm to shipyard, and from farm to port, are calculated. In the energy phase the energy produced by each wave energy converter is determined, and in the economic phase, the parameters calculated in the previous phases are used as input to find the economic parameters. Finally, in the restrictions phase, a limitation by the bathymetry will be added to the economic maps, whose value will be different depending on the floating offshore wave energy converter (WEC). In this study, three wave energy converters have been considered, Pelamis, AquaBuOY, and Wave Dragon, and several scenarios for electric tariffs have been taken into account. The results obtained indicate what the best WEC is for this study in terms of its levelized cost of energy (LCOE), internal rate of return (IRR), and net present value (NPV), and where the best area is to install wave energy farms.

Highlights

  • The first wave power patent was from the 18th century and during the centuries, lots of types of devices have been developed [1]

  • The aim of the present paper is to develop a methodology to calculate the economic feasibility of floating offshore wave energy farms following several phases: geographic phase, energy phase, economic phase, and restrictions phase

  • The goal of this paper was to develop a method to calculate the economic feasibility of floating offshore wave energy farms

Read more

Summary

Introduction

The first wave power patent was from the 18th century and during the centuries, lots of types of devices have been developed [1]. There are many ways the WECs can be classified Depending on their working principle, they can be classified as oscillating water columns, oscillating bodies, and overtopping devices [2,3]. The oscillating water column device works using an air turbine (Pico [4], LIMPET, Sakata, Mutriku [5], Mighty Whale [6], Ocean Energy, SPERBOY [7], Oceanlinx [8], and REWEC3 [9]); the oscillating bodies work with a hydraulic motor, a hydraulic turbine, and a linear electrical generator Other WECs are: the Wavestar, which produces electricity due to the motion

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call