Abstract
The separation of synthetic dye Rhodamine 6G (R6G) and water was investigated using blended organic liquids in a supported liquid membrane (SLM) extraction system. Liquid membrane (LM) components include octyl alcohol (OcOH) as the dye extractant and a polysiloxane liquid as the stabilizing agent. Initial permeation results revealed the suitability of poly (phenyl methyl) siloxane (PPMS) over poly (octyl methyl) siloxane as the blending agent. The most acceptable condition for dye extraction was determined at feed solution pH≅1, wherein highest distribution coefficient, KD (OcOH/H2O)=18, was attained. Though permeability decreased at optimal blending condition of 1:1 (w/w) OcOH/PPMS, SLM longevity was exhibited with>98% LM retention after 15h operation in contrast to pure OcOH SLM system (>60% LM loss). Equilibrium experiments reveal that dye extraction followed Langmuir adsorption principle. The dye transport was elucidated using mass transfer analysis wherein it showed a decrease in overall coefficient (ko) at increasing feed concentrations. This was a direct consequence of KD decline, which becomes more apparent at higher concentrations when SLM saturation point is approached. At varied hydrodynamic conditions, improved ko values were observed up to Reω=10,000 when minimal variation in film resistance is attained. Beyond this condition, ko becomes independent from stirring rate effect nonetheless SLM stability is compromised due to shear-induced LM losses.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
