Dual Polarized Reconfigurable MIMO Antenna for Multi-Band Functioning

Abstract

This work presents the development, fabrication, and measurements of a new Ultra-wideband sensing multi-band frequency reconfigurable MIMO Active Integrated Antenna (AIA). The proposed antenna has two frequency reconfigured (switching element PIN diodes) planar inverted F-shape antennas (PIFA) using meandered line (ML) structures and a Mirror-shape UWB sensing antenna. The Mirror-shape UWB sensing antenna is integrated with 2x2 MIMO Meandered line PIFA elements for spectrum sensing. PIN diodes (BAR 6402V) are used to provide all digital switching on/off combination modes to attain frequency reconfigurability. Varactor diodes are used for tuning over the wide band. The proposed antenna senses a wide frequency band from 0.5GHz-3GHz and provides frequency reconfigurability over the five bands based on BARP6402V switching modes (0.78GHz-1.01GHz, 1.34GHz-1.62GHz, 1.85GHz-2.18GHz, 2.44GHz-2.67GHz, and 2.76GHz-2.80GHz). All the measured resultant performance parameters are compared with simulation software results. The antenna system is fabricated on an FR4 substrate of size 120mmX65mmX1.6mm. The proposed method used to achieve frequency reconfigurable ultra-wideband MIMO provides a high gain 6.15dBi at a frequency of 1.75GHz. The research also analyzed and investigated all 2x2 MIMO resultant parameters like Total Active Reflection Coefficient (TARC), Isolation coefficient, Envelope correlation Coefficients (ECC), Diversity Gain (DG), Multiplexing efficiency, etc. The proposed antenna is applicable for sensing, communication, & UWB sensing, and cognitive radio (CR) applications since it exhibits stable excellent gain and Omni-directional radiation pattern over the desired bands. Because of its reconfigurable nature, the same antenna also supports use in multiple general-purpose applications like GPS tracing, LTE, UMTS, GSM1800, rescue operation, Wi-Fi/Bluetooth/ISM/WLAN, CDMA, etc applications.