Abstract
In this paper, a novel design of compact quad-element MIMO (Multiple Input Multiple Output) antenna for 5G communication networks and satellites is proposed. The four similar elements of this antenna are placed perpendicularly to each other on a 40x40 mm2 FR4 substrate. Each element is fed by a CPW (coplanar waveguide) line. Two slits and an I-shaped slot are etched into the patch, and by varying their parameters; a good matching is achieved in the lower (4.9 GHz) and upper (17 GHz) frequency bands. However, 25 and 30 dB isolations are attained in the lower and upper bands, using the polarization diversity technique and adding stubs on the ground plane. A prototype of the proposed antenna is fabricated and measured. Moreover, the performance of the MIMO antenna is studied in terms of ECC (envelope correlation coefficient), DG (diversity gain), TARC (total active reflection coefficient), realized gain, efficiency, and radiation pattern, validated with the measured results, and showed a good agreement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.