Abstract
In this study (Pb,Sr)TiO3 (PST) thin films were etched with inductively coupled Cl2∕(Cl2+Ar) plasmas. The etch characteristics of PST thin films as a function of Cl2∕(Cl2+Ar) gas mixtures were analyzed by using a quadrupole mass spectrometer. Systematic studies were carried out as a function of the etching parameters, including the radio frequency power and the working pressure. The maximum PST film etch rate is 56.2nm∕min, because a small addition of Cl2 to the Cl2∕Ar mixture increased the chemical effect. It was proposed that sputter etching is the dominant etching mechanism while the contribution of a chemical reaction is relatively low due to low volatility of the etching products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
