Distinguishable photorecycling of PVDF nanocomposites membrane for reactive yellow 145 dye and real industrial wastewater treatment by different photocatalytic processes

Abstract

This paper investigates the photocatalytic performance and recyclability of PVDF-MWCNTs-TiO2 nanocomposite membranes for the treatment of textile wastewater under sunlight irradiation. The nanocomposites were fabricated by incorporating varying weight ratios of MWCNTs-TiO2 (1 %, 3 %, 6 %, and 9 %) into PVDF matrices using a solvent casting method. Optimal loading of MWCNTs-TiO2 at 9 wt% resulted in nanocomposites with enhanced surface area (94.15 m2/g), reduced band gap (2.38 eV), uniform dispersion of nanoparticles, and abundant surface hydroxyl groups. Under Xenon lamp irradiation, the optimized PVDF-9 %(MWCNTs-9 %TiO2) nanocomposite achieved a high apparent reaction rate constant (kapp) of 9.92 × 10−3 s−1 for photocatalytic degradation of the model dye Reactive Yellow 145. Significantly, when tested on-site at a Saudi Arabian textile facility over 6 months, this nanocomposite effectively reduced the chemical oxygen demand (COD) of real wastewater samples to regulatory limits of 1000 ppm under natural sunlight irradiation. The COD values were lowered from an initial 5050–6200 ppm to a final range of 785–945 ppm using the PVDF-9 %(MWCNTs-9 %TiO2) membrane. Furthermore, the optimized nanocomposite exhibited good recyclability, retaining around 87 % of its initial activity after 8 reuse cycles for industrial wastewater treatment. The excellent photocatalytic efficiency and reusability of the MWCNTs-TiO2 modified PVDF nanocomposite under solar irradiation highlight its promise as a sustainable membrane technology for environmental remediation.