Abstract

Objectives:The objective of this study is to investigate characteristics about removal of dissolved organic matter (DOM) and its fraction for improving operation efficiency in an advanced water treatment plant. Methods:The monitoring of water quality was conducted at five processes such as raw water, pre-oxidation, after sedimentation, post-ozonation, after biological activated carbon (BAC) from July 2020 to August 2021 in advanced water treatment process (AWTP) supplying 180,000m<sup>3</sup>/day. The concentration of DOC (dissolved organic carbon) and number of algae were monitored and LC-OCD was used to fractionate DOC to four species, biopolymer (BP), humic substance (HS), building blocks (BB), and low molecular weights (LMWs). Results and Discussion:The characteristics of raw water showed that the concentration of DOC and the number of algae increased with an increase in water temperature. The portion of BP and HS significantly increased at low and high water temperature, respectively, while BB and LMWs maintained the similar portion. The removal efficiency of DOC in the AWTP was achieved at 59% with each species of BP, HS, BB, and LMWs obtaining removal efficiency of 87%, 65%, 26%, and 52%, respectively. Coagulation/sedimentation/filtration showed removal efficiency of 84%, 56%, 20%, and 18% for BP, HS, BB, and LMWs, respectively, corresponding to their molecular weight. The effect of post-ozonation would be negligible except for BP. In BAC, removal efficiency of 49% and 12% were obtained for LMWs and BB (low molecular weight, respectively. As a result, the BP portion significantly decreased due to high removal efficiency, while BB portion was increased in the final treated water compared to raw water. Conclusion:Most of DOM was removed in coagulation/sedimentation/filtration and BAC, whereas oxidation process such as pre-chlorination, pre-ozonation and post-oxidation did not have an effect on DOM removal. In coagulation/sedimentation/filtration, 84% and 54% of the BP and HS were removed, while BAC removed 49% and 12% of LMWs and BB, respectively. It has been recommended to improve the removal efficiency of BB, which obtained the lowest removal efficiency in AWTP, and to enhance the removal efficiency of LMWs in BAC to inhibit microbial regrowth in the distribution system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call