Abstract
Bipolar plate is one of the largest and most important components in Polymer Electrolyte Membrane Electrolyzer and Fuel Cell that functions as a cell separator, electrical and heat conductor, reactant feed distributor, for the flow of gas-liquid mixture and supporting components for the Membrane Electrode Assembly. In general, injection, compression moulding or Computer Numerical Control-machines are commonly used to produce bipolar plate. These methods, however, cannot be used to produce complex 3-dimensional shapes, such as vertically inverted cone shape or creating a channel inside the plate. By using a 3-dimensional printing machine with laser-based stereolithography or digital light processing, complex design problems and problems in making channels in the plate can be solved easily. In this study, polymer-based bipolar plate was developed using 3-dimensional printing technology which was made conductive by introducing nickel and gold layers through spray coating and electrocoating processes. The nickel layer was optimized by controlling the applied voltage during electrocoating. Since low voltage formed very thin layer whereas high voltage caused “burning” of the sample, applied voltage of 5V was found to be the optimum condition. Employment of gold layer increases the conductivity from 300 S cm−1 to 400 S cm−1 which enabled the corrosion current density to drop to 0.470 uA cm−2, meeting the standard set by US Department of Energy. The porosity test also proved that the bipolar plate was impermeable to hydrogen gas. Therefore, this manufacturing method has great potential to be used for the production of sophisticated electrolyzer cell or fuel cell in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.