Development of Au/CuO nanoplasmonic thin films for sensing applications

Abstract

Nanocomposite thin films, containing Au nanoparticles dispersed in a CuO matrix, were prepared by reactive DC magnetron sputtering and post-deposition thermal annealing. The CuO matrix was found to be stoichiometric and the atomic concentration of Au was determined to be about 12.3at.%. After the annealing process, the average size of the crystalline domains of the Au nanoparticles (fcc structure) increased from about 6nm (at an annealing temperature of 300°C) to approximately 13nm (after annealing at 800°C), with a progressive crystallization of the CuO matrix in the monoclinic structure. A nanoplasmonic effect due to the localized surface plasmon resonance (LSPR) phenomenon appeared in the films after annealing temperatures of 400°C and higher. The correspondent LSPR bands appeared in the visible range of the transmittance spectra, becoming progressively narrower. Angle Resolved X-ray Photoelectron Spectroscopy results indicated that the surface of Au/CuO nanocomposite thin film is contaminated with a sub-nanometric layer (~0.6nm) of hydrocarbons and that the Au nanoparticles are relatively homogenously dispersed inside the CuO dielectric matrix. Furthermore, the results seem also to indicate that the Au nanoparticles are covered with about 0.2nm of CuO. Although further studies need to be performed to make clear the particular features of the present nanocomposite thin films' system, this work shows promising results concerning some particular applications that are envisaged, namely their use as LSPR sensing platforms for particular molecules detection (e.g. gases).