Development of a QAMS Analysis Method for Industrial Lanolin Alcohol Based on the Concept of Analytical Quality by Design

Abstract

The Analytical Quality by Design (AQbD) concept was adopted to establish a quantitative analysis of multi-components with a single marker (QAMS) method for industrial lanolin alcohol, targeting cholesterol, lanosterol, and 24,25-dihydrolanosterol. The potential critical method parameters (CMPs) were identified as column temperature, flow rate, and gradient. Definitive screening design and statistical modeling were employed to optimize the gradient conditions of the mobile phase, column temperature, and flow rate. The Method Operable Design Region (MODR) was determined using a risk-based quantification approach. The robustness was assessed using a Plackett–Burman experimental design, followed by methodological validation. Optimal analytical conditions were as follows: acetonitrile (B)—water (A) mobile phase system; flow rate of 1.58 mL/min; detection wavelength of 205 nm; injection volume of 10 µL; and column temperature of 37 °C. A gradient elution program was implemented as follows: 0–19.0 min, 90.5% B; 19.0–25.0 min, 90.5–100% B; and 25.0–55.0 min, 100% B. Cholesterol served as an internal standard for quantifying lanosterol and 24,25-dihydrolanosterol, with relative correction factors of 0.4227 and 0.8228, respectively. This analytical method utilized only the cholesterol reference substance as an internal standard to quantify the content of cholesterol, lanosterol, and 24,25-dihydrolanosterol in industrial lanolin alcohol. It reduced the testing costs and enhanced efficiency, making it potentially suitable for widespread adoption in lanolin alcohol processing industries.