Abstract
There are two basic types of nanoimprint lithography: hot embossing using thermoplastic or thermosetting polymers and UV-based nanoimprint lithography (UV-NIL) using UV-curable polymer systems. Since the interest in UV-NIL has been constantly increasing within the last years, the need of suitable low-viscosity resists has increased, too. The availability of such materials is one key element of the UV-NIL technology. In this contribution a novel, spin-coatable polymer system for UV-NIL is presented. Suitable polymer components were evaluated using photoDSC analysis. Their ratio was adjusted in such a way that the overall dynamic viscosity of the mixture remained low which was beneficial for the flow behaviour. Film thicknesses in the range of 150–500 nm could be obtained by spin-coating. The new polymer system was characterised in UV-NIL processes and in plasma etching investigations. Imprinted micrometer as well as nanometer scale patterns with feature sizes in the range of 30 nm to several microns are shown.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.