Development of a new reagent for the prevention of asphaltene-resin-paraffin deposits

Abstract

Asphaltene-Resin-Paraffin deposits (ARPD) form a certain proportion of the crude oil mass, separating as temperature and pressure decrease and adsorbing to the surfaces of the reservoir wellbore zone, downhole equipment and tubulars. These deposits precipitate in the wellbore zone, oilfield equipment and pipes,resulting in reduced system productivity, reduced pumping efficiency of the pumping equipment and other negative consequences. Asphalt-resin and paraffin deposits (ARPD) are a complex mixture of solid paraffin hydrocarbons, asphalt-resin substances (ARS), water and mechanical impurities. The strength and composition of ARPD depend on the composition and properties of oil, geological, physical and technological conditions of field development. Chemical methods for removing deposits are currently the most widely used, as they are highly effective and technologically advanced. To this end, new reagents have been developed and their physico-chemical properties have been studied. Subsequently, the selected reagents were tested on oil samples from Oil and Gas Production Department (OGPD) with a paraffin content of more than 6 %. It was also shown that paraffin inhibitors have individual effects; a reagent that is effective on oil from one field may not have the same effect on oil from other fields. The research includes studies of selected reagents for paraffinic oils from different fields. Using the «cold finger» method, the efficacy of the selected reagents against paraffin deposition was investigated and their optimum doses were determined. Keywords: reagent; sendiment; paraffin; asphaltene; resin; well bottom zone; viscosity; depressor.