Abstract
An analytical method employing solid phase extraction (SPE) and gas chromatography-tandem mass spectrometry (GC–MS/MS) has been developed for quantitative determination of twenty-six organohalogen disinfectant by-products (OXBPs) in water samples. Target analytes include four trihalomethanes (THMs), four iodohalomethanes (I-HMs), one haloacetaldehyde (HAL), six haloketones (HKs), four halonitromethanes (HNMs), and seven haloacetonitriles (HANs). The sample preparation procedure includes pretreatment with ascorbic acid to quench residual oxidants, followed by analyte enrichment using solid-phase extraction. Five SPE sorbents were tested. The best results for the majority of target analytes were obtained using a styrene-divinylbenzene copolymer phase and methyl tert-butyl ether (MTBE) as the elution agent. GC–MS analysis was performed using electron ionization (EI) and selected reaction monitoring (SRM) for analyte detection. The performance of the method was assessed according to the French standard NF T90-210. The method showed LOQs ranging from 3 to 3000 ng L−1. The applicability of the method has been demonstrated by analyzing both river water and tap water samples. The OXBPs detected most often in the tap water were dibromochloromethane (in 100% of the samples, 4.3–4.7 μg L−1), bromodichloromethane (100%, 1.3–1.7 μg L−1), tribromomethane (100%, 0.8–4.4 μg L−1), trichloromethane (100%, 0.6–0.7 μg L−1), dibromoacetonitrile (75%, 0.5–0.9 μg L−1), with dichloroacetonitrile and 1,1,1-trichloro-2-propanone detected at concentrations around the LOQ levels. In the treated river water samples, the only OXBPs measured at levels above the limit of quantification were trichloromethane and 1,1,1-trichloro-2-propanone. To the best of our knowledge, this is the first SPE-GC–MS/MS method enabling the analysis of an extensive list of OXBPs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
