Separation of C6 hydrocarbons on sodium dithionite reduced graphene oxide aerogels

Abstract

The ability of reduced graphene oxide aerogels (rGOAs) for challenging gas-phase separation was investigated with hexane isomers and benzene (C6 hydrocarbons) using inverse gas chromatography (IGC). For the first, rGOAs were synthesized with sodium dithionite (DTN) as a reductant. Experiments revealed that the most optimal DTN to graphene oxide mass ratio was 2:1, resulting in the highest specific surface area of 432.3 m2 g−1 and the highest degree of graphitization among analyzed samples. C6 hydrocarbon adsorption tests demonstrated the dominant role of the kinetic effect for the adsorption of branched and cyclic hexane isomers - the partition coefficient decreased as the molecule kinetic diameter increased. The contribution of thermodynamic effects was distinguished for molecules with uneven charge distribution. A comparison of the partition coefficient ratios for different pairs of hydrocarbons demonstrated the potential of rGOAs in separating various C6 hydrocarbons. The selectivity, calculated from binary-component adsorption tests of benzene (Bz)/cC6 equimolar mixture, was 13.7, 8.5 and 2.8 for DTN4, DTN2, and DTN1. The research indicates that rGOAs may have potential as adsorbents for the selective separation of hydrocarbons, however, the competitive adsorption and performance at high surface coverages of adsorbates have to be accounted for in further research to assess the applicability of rGOAs reliably.