Abstract
In this paper, a miniaturized and polarization insensitive frequency selective surface filter with large band ratio (BR) is presented. This structure consists of one metal layer and two dielectric layers. The metal layer includes two parts, with the outer square loop providing a lower frequency stopband and the inner pattern providing a higher frequency stopband. The structure has excellent miniaturization characteristics, in particular, the unit size is only 0.054λ0 and the thickness is only 0.014λ0, where λ0 is the wavelength corresponding to the first resonant frequency. Additionally, there is only one layer of metal layer, which greatly reduces the processing complexity and cost. The measurement results show that for TE and TM polarization, the center frequencies of the two stop bands are 2.03 and 18.98 GHz corresponding to a BR of 9.35. It can be used as a spatial dual frequency filter with large frequency band separation. In addition, the proposed structure also possesses advantages such as wideband response, polarization insensitivity, and high angle stability. The simulation results are in good agreement with the measured results.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call