Design of low-power hybrid digital pulse width modulator with piecewise calibration scheme

Abstract

A low-power hybrid digital pulse width modulator (DPWM) is proposed in the paper. Owing to the piecewise calibration scheme, the delay time of delay line is locked to target frequency. The delay line consists of two piecewise lines with different control codes. The delay time of each cell in one sub-delay-line is longer than the last significant bit (LSB) of DPWM, while the delay time of each cell in the other sub-delay-line is shorter than LSB. Optimum linearity is realised with minimum standard cells. Simulation results show that the differential nonlinearity and integral nonlinearity are improved from 5.1 to 0.4 and from 5 to 1.3, respectively. The DPWM is fully synthesised and fabricated in a 90-nm CMOS process. The proposed DPWM occupies a silicon area of 0.01 mm2, with 31.5 μw core power consumption. Experimental results are shown to demonstrate the 2-MHz, 10-bit resolution implementation. Pulse width histogram is firstly introduced to characterise the linearity of the DPWM.