Abstract
New insights are proposed into enhancing detection of uranyl ions (UO22+) by electropolymerization brilliant cresyl blue-modified glassy carbon electrode (PBCB/GCE). The mercury-free PBCB/GCE sensor was applied to determine UO22+ in water samples by differential pulse adsorptive stripping voltammetry (DPAdSV). The unique combination of the PBCB/GCE and DPAdSV significantly improves sensitivity due to the polymer of high electroactive area and fast electron transfer rate. The DPAdSV current using a 3 mm diameter PBCB/GCE was proportional to the UO22+concentration in the range 2.0-90.0 μg·L-1 (- 0.113 V vs. SCE) with a detection limit of 0.650 μg·L-1, RSD = 3.1% (n = 10), and 4.5% reproducibility. In addition, the sensitivity for UO22+ determination was further improved at using an 1 mm diameter PBCB/GCE, which enhances the efficiency of UO22+ deposition due to its higher current density. The 1 mm diameter PBCB/GCE based on DPAdSV technique could be used to determine uranyl ions in the concentration range 0.20-2.0 μg·L-1 (- 0.113 V vs. SCE) with a detection limit of 0.067 μg·L-1, RSD = 5.7 % (n = 10) and 5.4% reproducibility. Hence, the PBCB/GCE is a suitable candidate to substitute the mercury electrode. Graphical abstract.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.