Abstract
In this paper, based on the lift-type wind turbine, an adaptive double-drive lift–drag composite vertical-axis wind turbine is designed to improve the wind energy utilization rate. A drag blade was employed to rapidly accelerate the wind turbine, and the width of the blade was adaptively adjusted with the speed of the wind turbine to realize lift–drag conversion. The aerodynamic performance analysis using Fluent showed that the best performance is achieved with a blade curvature of 30° and a drag-type blade width ratio of 2/3. Physical experiments proved that a lift–drag composite vertical-axis wind turbine driven by dual blades can start when the incoming wind speed is 1.6 m/s, which is 23.8% lower than the existing lift-type wind turbine’s starting wind speed of 2.1 m/s. At the same time, when the wind speed reaches 8.8 m/s, the guide rail adaptive drag-type blades all contract and transform into lift-type wind turbine blades. The results show that the comprehensive wind energy utilization rate of the adaptive dual-drive lift–drag composite vertical-axis wind turbine was 5.98% higher than that of ordinary lift-type wind turbines and can be applied to wind power generation in high-wind-speed wind farms.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
